Spoiler
Spoiler
• After painting, the spoiler of the TT RS is assembled from the components shown in the assembly overview.
• The spoiler is not designed for disassembly.
Removing
- Remove the lower rear lid trim.
Roadster:
- Expose electrical wiring harness - 1 - on the line channel - arrows -.
- Detach the control cable from mount - 3 -. Refer to => [ Rear Lid ] Rear Lid.
- Remove control cable and line channel mount - 2 - from the rear lid.
All vehicles:
- Disconnect the connector - 1 -.
- At the locations indicated by - arrows -, unscrew nuts - 2 -.
- Remove the lower part of the spoiler.
Installation
• For the correct tightening specifications, refer to => [ Rear Spoiler Assembly Overview ] Spoiler - TT RS.
Install in reverse order of removal. Note the following:
- Attach the control cable at the mount. Refer to => [ Rear Lid ] Rear Lid
- Install the lower rear lid trim.