Test Drives with the Use of Test and Measuring Devices

Test Drives with the Use of Test and Measuring Devices

If testing equipment must be used during a road test, observe the following:






Distraction and testing equipment that is not secured properly can cause accidents.

The passenger airbag could pose a risk if it deploys in a collision.

• Operating testing equipment while driving causes it to shift position.

• There is an increased risk of injury due to unsecured testing equipment.

• Position passenger's seat as far back as possible.

• Only use the vehicle diagnosis and service system (VAS 5052 A) or diagnostic system (VAS 5053).

• Testing and measuring instruments - 1 - must lay flat on the passenger's thighs and be operated by him or her, as shown in the illustration.