Tire Pressure Monitoring Control Module 2 (J793)

Tire Pressure Monitoring Control Module 2 (J793)

Removing

The tire pressure monitoring control module 2 is located under the instrument cluster.

Before removing control module, read out code using Guided Fault Finding in "Replace control module" function.

- Remove instrument cluster.

- Remove bolts - arrows -






- Remove tire pressure monitoring control module 2 - 2 - and disconnect the connector - 1 -.

Installing

Install in reverse order of removal. Note the following:

- If Tire Pressure Monitoring Control Module 2 is replaced, system must be coded.

- Connect -VAS- -5051 and select "Guided Functions" vehicle diagnostic tester.

Then:

- 4C Tire pressure monitoring II J793

- Replacing 4C control module (Repair Group 44)