Safety Precautions, Test Drives With the Use of Test and Measuring Devices
Test Drives with the Use of Test and Measuring Devices
If testing equipment must be used during a road test, observe the following:
Distraction and testing equipment that is not secured properly can cause accidents.
The passenger airbag could pose a risk if it deploys in a collision.
• Operating testing equipment while driving causes it to shift position.
• There is an increased risk of injury due to unsecured testing equipment.
• Position passenger's seat as far back as possible.
• Only use the vehicle diagnosis and service system (VAS 5052 A) or diagnostic system (VAS 5053).
• Testing and measuring instruments - 1 - must lay flat on the passenger's thighs and be operated by him or her, as shown in the illustration.