Transmission Input Speed Sensor (G182) and Clutch Oil Temperature Sensor (G509)
Transmission Input Speed Sensor (G182) and Clutch Oil Temperature Sensor (G509)
Removing
Risk of transmission damage.
• Do not run engine or tow vehicle with oil pan removed or without transmission fluid.
• General repair instructions, refer to => [ Repair Information ] 02EA (S-Tronic) Transmission.
• Observe cleanliness rules when working on transmissions, refer to => [ Clean Working Conditions ] 02EA (S-Tronic) Transmission.
- Remove the ATF pan. Refer to => [ Oil Pan ] 02EA (S-Tronic) Transmission.
- Remove the Direct Shift Gearbox (DSG) transmission Mechatronic (J743). Refer to => [ Direct Shift Gearbox (DSG) Transmission Mechatronic (J743) ] Direct Shift Gearbox (DSG) Transmission Mechatronic (J743).
- Remove bolt - B -.
- Remove transmission input speed sensor and clutch oil temperature sensor item - A - together with the wire - C - from transmission.
Installing
Install in reverse order, paying attention to the following:
Tightening specifications, refer to:
• => [ Oil Pan, Mechatronic and Transmission Fluid Pump Overview ] Oil Pan, Mechatronic and Transmission Fluid Pump Overview
• => [ and ] Oil Pan, Mechatronic and Transmission Fluid Pump Overview
- Coat transmission input speed sensor and clutch oil temperature sensor with gear oil.
- Insert transmission input speed sensor and clutch oil temperature sensor in side opening on transmission and tighten. Oil Pan, Mechatronic and Transmission Fluid Pump Overview.
- Install DSG transmission Mechatronic. Refer to => [ Direct Shift Gearbox (DSG) Transmission Mechatronic (J743) ] Direct Shift Gearbox (DSG) Transmission Mechatronic (J743).
- Install the oil pan. Refer to => [ Oil Pan ] 02EA (S-Tronic) Transmission.
- Fill transmission with oil. Refer to => [ Transmission Fluid, Replacing or Filling after Repair ] Transmission Fluid, Replacing or Filling After Repair and check oil level => [ Transmission Fluid, Replacing or Filling after Repair ] Transmission Fluid, Replacing or Filling After Repair.
- Perform a basic setting using the vehicle diagnostic tester.