Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2012 >> A3 (8PA) L4-2.0L DSL Turbo (CBEA) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair






Camshaft Position (CMP) Sensor (G40)

- Remove the ribbed belt.

- Remove vibration damper.

- Remove toothed belt.

- Remove the Exhaust Gas Recirculation (EGR) vacuum regulator solenoid valve (N18).

- Disconnect the connector - arrow - from the CMP sensor and pull the connector out of the mount.






- Remove the CMP sensor - arrow -.






- Remove the ribs with a screwdriver and remove the cover for the repair opening - arrows -.






- Remove the CMP sensor from the cylinder head and guide the connector through the opening in the toothed belt guard.

Installing

Install in reverse order of removal. When doing this note the following:

• Seal off the opening in the toothed belt guard with a rubber plug. Refer to the Electronic Parts Catalog (ETKA)

- Mount the toothed belt and adjust the valve timing.

- Install vibration damper.

- Install the ribbed belt.

pro multis · About Operation CHARM