EGR Temperature Sensor: Service and Repair

EGR Temperature Sensor

Special tools, testers and auxiliary items required

• Hose clip pliers (VAS 6340)

• 14 mm Socket (T10401)

Removing

- Remove the air filter housing.





- Free up the vacuum hoses - arrows - on the air guide pipe.





- Loosen the hose clamp - 2 - and remove the air guide pipe.

- Remove the bolt - 1 - and then remove warm air collector plate - arrow -.





The illustration shows the EGR temperature sensor (G98) as seen from the engine compartment looking out from the transmission side - arrow - below the brake master cylinder.





- Remove the EGR temperature sensor using the (T10401).

Installing

• Tightening specifications, refer to => [ Turbocharger Assembly Overview ] Turbocharger Assembly Overview.

Installation is performed in reverse order.