Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2012 >> A3 (8PA) L4-2.0L Turbo (CCTA) >> Repair and Diagnosis >> Diagrams >> Connector Views >> Fuel Gauge Sender >> Fuel Level Sensor 2, Connector Assignment
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Level Sensor 2, Connector Assignment






Fuel Level Sensor 2, Connector Assignment

Procedure






The fuel level sensor 2 (G169) is at the left under the rear seat bench.

- Remove rear seat bench.

- Unclip left locking flange cover retaining tabs - arrows -.

- Carefully release and disconnect the connector - 1 - on the connector flange.






• Disregard item - 2 -.

Terminal assignment of the 3-pin harness connector at fuel level sensor 2 - vehicles through approximately 11.04






1. Wire connection from fuel level sensor to instrument cluster (fuel gauge)

2. Fuel level sensor 2 ground (sensor ground)

3. Not used


Terminal assignment of the 3-pin harness connector at fuel level sensor 2 - vehicles from approximately 11.04






1. Fuel level sensor 2 ground (sensor ground)

2. Wire connection from fuel level sensor to instrument cluster (fuel gauge)

3. Tank sensor total resistance


pro multis · About Operation CHARM