Headlamp Control Module: Service and Repair

Headlamp Range Control Module

Component location is on the front of the central tube for the instrument panel inside the driver footwell

Removing

- If the control module was replaced, select the Replace function for the respective control module in Guided Fault Finding or Guided Functions.

- Select the function or path






- Follow the instructions on the Vehicle Diagnosis Tester display.

- Remove the driver storage compartment.

- Disconnect electrical connector - 2 -.






- Remove screws - 3 - and - 4 - and remove headlamp range control module (J431) - item 1 -.

Installing

Install in reverse order of removal, noting the following:

If headlamp range control module was replaced, it must be re-coded.

- Select the function or path






- Follow the instructions on the Vehicle Diagnosis Tester display.

- Install the driver storage compartment.

Tightening Specifications