Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2012 >> A3 (8PA) L4-2.0L Turbo (CCTA) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Start / Stop Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Start / Stop Switch: Service and Repair







Start/Stop Mode Button

Removing






- Switch off ignition and remove ignition key.

- Remove the emergency warning switch. Refer to => [ Emergency Flasher Switch, from 06.2008 ] Emergency Flasher Switch, From 06.2008.

- Remove the selector unit trim.

- Releases the retaining spring - arrows - and remove the switch mount - 1 -.

- Disconnect the electrical connector - 3 -.






- Press the start/stop mode button (E693) - 1 - out of the switch mount - 2 - - arrow -.

Installing

Install in reverse order of removal, observing the following:

- Press the button into the switch mount.

- Remove the selector unit trim.

- Install the emergency warning switch. Refer to => [ Emergency Flasher Switch, from 06.2008 ] Emergency Flasher Switch, From 06.2008.

pro multis · About Operation CHARM