Rear Outer Belt Guide, Avant

Rear Outer Belt Guide, Avant

• Removing and installing is identical for the left and right sides.

Removing






• Do not rotate the bolts under any circumstances when removing and installing belt guide. They have been set by the manufacturer.

• Replace the entire belt guide if damaged.

- Remove the luggage compartment side trim. Refer to => [ Luggage Compartment Side Trim ] Luggage Compartment Side Trim.

- Remove the foam piece from the opening under the belt guide - 1 -.

- Insert a screwdriver into the opening under the belt guide and press the clip upward - arrow A - and hold it.

- Push the belt guide to the rear - arrow B - until the bolt heads can be disengaged from the bracket on the body.

- Rear outer right seat belt guide: Disconnect the connector for the rear parking aid warning buzzer (H15).

Installing

Install in reverse order of removal. Note the following:

- Insert the belt into the depression in the belt guide - 1 - and then place the belt guide on onto the bracket.

- Insert the belt guide with the bolt heads in the guides on the console.

- Press the belt guide down while pulling it forward. This engages the bolt heads in the guides.

- Pull the belt webbing forward until the retaining hooks engage audibly.