Distance Sensor: Service and Repair

Adaptive Cruise Control Sensor (G550) Overview






1 Cover

2 Clip

• Installed from MY 12

• Always replace the clip if the stud bolt - 3 - was removed.

• Removing and installing, refer to => [ Distance Regulation Control Module Clip, Replacing, from MY 12 ] Distance Regulation Control Module Clip, Replacing, From MY 12

3 Stud

• If the stud bolt is being removed, then the clip - 2 - must always be replaced.

• Observe adjustment dimension when installing, refer to => [ Measure Dimension of All Studs. ] Adaptive Cruise Control Sensor (G550)

4 Bracket

• For vehicles through MY 12

5 Nut

6 Bolt

• 8 Nm

7 Bolt

• 8 Nm

8 Angle Bracket

• Installed on vehicles from MY 12

9 Spring Nut

10 Bracket

• For vehicles from MY 12

• If a repair is required, the bracket is replaced by bracket - 4 -. Allocation, refer to the Parts Catalog

11 Adaptive Cruise Control Sensor

• There are different versions; allocation, refer to the Parts Catalog

• Removing and installing, refer to => [ Adaptive Cruise Control Sensor (G550) ] Adaptive Cruise Control Sensor (G550)

12 Connector

• Squeeze both clips to release the connector.