Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2012 >> A6 Sedan (4G2) L4-2.0L Turbo (CAEB) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Cooling System >> Radiator Cooling Fan Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Radiator Cooling Fan Control Module: Service and Repair






Coolant Fan Control Module

Removing

- Remove the front noise insulation - 1 -.






- Remove the coolant fan electrical connector - 1 - from the bracket and disconnect it by sliding the retainer back - arrow - and pressing the release down.






- Free up the electrical wiring harness to the radiator fan control module.

- Disconnect the connectors - 2 - and - 3 -.






- Remove the bolt - arrow - and the coolant fan control module - 1 -.

Installing

Install in reverse order, paying attention to the following:

• Tightening specification, refer to => [ Fan Shroud and Coolant Fan Overview ] Fan Shroud and Coolant Fan Overview.

- Install the front noise insulation.

pro multis · About Operation CHARM