Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2012 >> A7 Quattro Sportback (4GA) V6-3.0L SC (CGXB) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Engine Control Module (J623)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module (J623)






Engine Control Module (J623)

Removing

- Select "replace engine control module" in "Guided Functions" on the vehicle diagnostic tester if the Engine Control Module (ECM) was replaced.

- Turn off the ignition.

- Remove the plenum chamber cover.

- Remove the bolts - arrows -, pull the filler tube out of the windshield washer fluid reservoir and out of the opening in the body and move it to the right.






- Open the retainer - arrow - and remove the ECM - 1 -.






• Ignore - 2 -.

Installing

Install in reverse order of removal. Note the following:

Perform the following step after installing a new ECM.

- Activate the engine control module in "Guided Functions" under "replace engine control module". To do this, use a vehicle diagnostic tester.

pro multis · About Operation CHARM