Axle Alignment Control Position on Vehicles With Air Suspension, Checking

Axle Alignment Control Position on Vehicles with Air Suspension, Checking

Checking

- Connect (VAS 5051 B) and then perform vehicle-specific entry into Guided Fault Finding and select Go To button "function/component selection". Refer to => [ VAS 5051B, Connecting and Selecting Functions ] VAS 5051B, Connecting and Selecting Functions.

Then

- "Chassis (Repair group 01; 40 - 49)"

- "34 - Level control (Repair group 01: 43, 44)".

- "44 - Wheels, tires, vehicle alignment".

- "KD44 85 - Axle alignment".

Chassis 1BK/2MB

- Front height dimension: 449 mm

- Rear height dimension: 465 mm

Height Dimension - x -, Determining

Height dimension - x - is the measurement in mm between center of wheel and lower edge of fender.

- Measure rim diameter.






The measured value gives dimension: - a -.

- Measure from upper rim edge vertically to lower fender edge.

The measured value gives dimension: - b -.

Height dimension x is derived from:

x = a : 2 + b.