Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2012 >> Q7 Quattro (4LB) V6-3.0L SC (CJWC) >> Repair and Diagnosis >> Maintenance >> Alignment >> Service and Repair >> Procedures >> Front Axle Caster, Adjusting
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Axle Caster, Adjusting






Front Axle Caster, Adjusting

Special tools, testers and auxiliary items required

• Socket Wrench 21 mm (T10188)

- Remove connector nut - 1 - and install new nut as far as stop.






- Adjust caster by rotating eccentric bolt.

• The maximum adjustment range is 90° to left or right of center position.

- Tighten nut - 1 - with Socket (T10188) - item 12 - => [ (Item 12) Self-Locking Nut ] Front Axle Overview.

- After nut - 1 - has been tightened, check caster value again.

pro multis · About Operation CHARM