Ignition Switch: Service and Repair

REMOVING AND INSTALLING STEERING LOCK/IGNITION SWITCH:

- Disconnect battery ground lead.
- Remove instrument panel trim at bottom left.



- Unscrew steering column casing.




- Cut open clamp and pull wire harness out of holder.




- Compress retainers.
- Push up and disconnect outer plugs.




- Pull off plugs (1 and 2).




- Compress retainers.
- Pull plug out of holder.




- Unscrew screw (1) and remove plastic holder.
- Disconnect plug (2).




- Unscrew headless screw and pull out ignition switch.

Installation:
- Lock headless screw with clear lacquer.