Bleeding Procedure

Filling and Bleeding LAD System

1. With the engine off, till the power steering/LAD fluid reservoir until the fluid level is approximately 25 mm (1 in.) below the reservoir rim.

LAD Hydraulic Fluid: Pentosin CHF 7.1 hydraulic fluid or equivalent.

2. Start the engine. Turn the steering wheel from lock to lock two times. Turn the engine off.

WARNING: Only run the car in a well-ventilated area. Exhaust fumes can be fatal.

3. Raise the rear of the car until the drive wheels are off the ground. Wait about two minutes and check the fluid level. The fluid level should be no more than 25 mm (1 in.) above the base of the reservoir screen. Correct the fluid level as necessary.