With Manufacturer's Scan Tool

BMW Service Tester:

BMW MoDiC:

The contents of the defect code memory can be cleared with the BMW DIAGNOSTIC SYSTEM.

Description of BMW DIAGNOSTIC SYSTEM

Clearing the Defect Code Memory •D•999:

Carry out this step only when all defects have been rectified or are attributed to simulation. When the battery or the DME control unit are disconnected, all stored defect codes, the substitute values (if active) as well as the adaptation values are lost. Current defects cannot be cleared.

Important!

On no account clear the defect codes before repair, otherwise important information (troubleshooting, additional information etc.) will no longer appear on the display screen.