Disassembling and Assembling Rear Bumper

Disassembling and Assembling Rear Bumper

Remove bumper,

Unclip rubbing strip.

Unclip left and right rubber guards (1) and pull off towards rear (2).

Remove lower expansion rivets.

Remove upper expansion rivets.

Unclip bumper panel (1) at left and right. Pull holder (2) and inlet (3) off.

Remove expansion rivets and take off heat shield.

Unclip towing eye cover. Unclip and remove retaining strap.

Unscrew bolts and take bracket off carrier.

Installation note:
Tightening torque.