Shift Control Unit

Removing and Installing or Replacing Shift Control Unit

Remove oil pan. Transmission Oil Pans





Unfasten screws and remove oil strainer.
Installation: Tightening torque: Mechanical Specifications





Installation:
Replace O-ring (1).
To facilitate assembly, coat O-ring (1) with Vaseline.





Unscrew cover (1) from valve body.

Installation:
Tightening torque: Mechanical Specifications





Unscrew valve body on case.

Caution: Only unscrew bolts with head size (A) of 12 mm.

Installation:
Tightening torque: Mechanical Specifications





Turn connector to left and remove.





Remove retaining clip and press cable connector into transmission case.





Installation:
Note installation position in connector housing.





Installation:
Replace O-rings.
To facilitate assembly, coat O-ring (1) with Vaseline.





Remove valve body with wire harness.

Installation:
Note dowel pin (1).
The spigot (3) on the selector lever must engage in the groove of the slide valve (2).





Installation:
Insert dowel pin in the transmission case.