Z3/318ti Digital Clock/On-Board Computer

Z3/318ti Digital Clock/On-Board Computer

1995 - 1999 318ti
1996 - 2002 Z3

DIGITAL CLOCK




The digital clock is standard equipment on the ti and Z3 models. The time can be displayed in either the 12 or 24 hour modes. the modes is selected by pressing the "H" and "M" buttons simultaneously.

To set the clock - press the "H" button until the correct hour is displayed. The minutes are set by pressing and holding the "M" button until the correct minute is displayed.

ON-BOARD COMPUTER
The Z3 and 318ti offer an On-Board Computer with limited functions as optional equipment. The digital clock function of the BC is as follows:




- The time can be displayed for up to 8 seconds with the key switched off. When the key is switched on, the clock is always displayed unless a BC function is called up.

- The time is set using the clock and S/R buttons. Pressing and holding the clock button will put the clock into the time setting mode (the colon will flash). Set the hour first by pressing the clock button until the correct hour is displayed, press S/R, then set the minutes in the same fashion. Finally, press S/R to activate the clock with the new time.