Multi-Function Clock - Test Functions

Multi-Function Clock - Test Functions
Several internal test functions can be called up and displayed on the matrix of the multifunction clock. The test functions are not locked and can be accessed at any time.

To call up the test functions the "1000"and "10" input buttons must be pressed simultaneously. the desired test number is then entered followed by the SET/RES button. The following is a listing of the test functions available with the Multi-function clock:

0. Display test - same function as the BC
1. Language change - Six languages are stored in the clock for the check control display test including: English UK, French, Italian, Spanish, English US and German. The languages are selected by scrolling with the "1" button, followed by the SET/RES to select the desired language.
2. Time Mode - the clock display can be switched from a 12 hour to a 24 hour mode with this test function. Scroll with the "1" button followed by SET/RES to select.
3. Date mode - the date can be switched from a month/day to a day/month display with this test function. Scroll with the "1" button followed by the SET/RES button.
4. Temperature Mode - the display of the temperature can be switched from F to C with the test function. Scroll with the "1" button followed by the SET/RES
5. Compensation factor - information only
6. Display status (HEX) information only
41. Road speed display (Km)
53. Display of "K" number - correction factor for speedometer

The test function will cancel after several seconds or it can be canceled by pressing the clock button