Compressor/Pump: Service and Repair

Caution!
- After assembly perform height setting offset, refer to BMW Diagnosis System.
- In area of air line connections, extreme cleanliness must be ensured during removal and installation.
- Even small dirt particles can cause leakage in the system.

Remove spare wheel.






Unfasten cap screws and remove lines.
Unfasten cable clip.

Installation:
Refer to "New Air Line and Screw Connections", Notes on assembly. Service and Repair
Install lines with identical colors.






Rotate distributor block (1) through 45° and remove.
Twist connector housing (2) through 45° and remove.
Compress locking unit and remove connector.






Unfasten screws or nuts and remove air supply unit.