Replacing Rear Seat (Through-Loading System)

Removing And Installing/Replacing Rear Seat (Through-Loading System)

4-door models only:
Unclip rear seat on left/right towards top.

For op. ext. seat heating only:
Disconnect cable.

Lift out seat.

Installation:
Feed belt buckles and lap belt (1) through intended openings into correct position.







2-door models only:
Unclip rear seat on left/right towards top.

For op. ext. seat heating only:
Disconnect cable.

Pull out seat (if necessary under armrests) towards front.

Installation:
Feed belt buckles and lap belt through intended openings into correct position.
If necessary, make sure ISOFIX covers are correctly engaged.