Drive Axles, Bearings and Joints: Service Precautions

Chassis components made of aluminum

Due to the chemical and corrosion characteristics of aluminum, always comply with the following points when handling aluminum components

- Do not bring into contact with battery acid!

- Do not clean with wire brushes made of brass or iron! Always use wire brushes with stainless steel bristles!

- Do not expose to flying sparks when grinding/separating! Cover components!

- Do not strike with steel welding splashes! Cover components!

- Do not expose to temperatures above 80 degrees C, even for brief periods! Temperatures in paint facilities do not have the same impact