Replacing Lock Cylinder For Rear Seat Backrest -Through Loading

Removing And Installing/Replacing Lock Cylinder For Left/Right Rear Seat Backrest (Through-Loading)







Unclip plate.







Disconnect side of cover (1).

Version with leather cover:
If necessary, shorten cover clips (2) by approx. one half.







Unfasten retaining disc (1).
Unclip housing at side and top and pull out.

Installation Note: The cover must be attached correctly in the front of the cover clips (3).







Insert vehicle key in lock cylinder (1)
Unlock lock cylinder (1) in housing (2) with special tool 51 3 170 and pull out with vehicle key.