Fluid Filter - A/T: Service and Repair

Note: Remove and install transmission oil sump, refer to Transmission Pan, Service and Repair.

After completing work, top up ATF level.
Check/top up fluid level in automatic transmission, refer to Automatic Transmission Fluid, Service and Repair.

Caution:
It is absolutely essential to use the approved automatic transmission fluid in this automatic transmission.
Failure to comply with this requirement will result in serious damage to the automatic transmission!





Pull transmission oil screen (1) towards bottom and remove.





If sealing ring (1) remains in pump housing, it must be taken out and transmission oil screen must be replaced.





Installation: Different transmission oil screens are used in gasoline and diesel engines.
To avoid any mix-ups, check the specified dimension A before installation.

Dimension A
Gasoline engine:
M52TU = 39.00 ° 1.00 mm
M43TU = 39.00 ° 1.00 mm
Diesel engine (M57) = 30.00 ° 1.00 mm