Pedal Spacing Dimensions

Dimension H, J, K, F, G,





- Refer to Technical Data Below.

Dimension B





- Inspection dimension (B) from underside of pedal to face wall for:
- Clutch pedal (dimension B), refer to Technical Data below.
- Brake pedal (dimension A), refer to Technical Data below.

Dimension C





- Inspection dimension (c) for accelerator pedal, refer to Technical Data.

Technical Data
- Spacing between accelerator pedal and brake pedal
Refer to illustrations above for checkpoints.
Manual transmission J: 50 mm
Auto. transmission K: 60 mm
- Spacing between tunnel and brake pedal
Refer to illustrations above for checkpoints.
Manual transmission F: 135 ° 5 mm
Automatic transmission G: 145 ° 5 mm
- Spacing H between brake pedal and clutch pedal: 50 mm
Refer to illustrations above for checkpoints.
- Distance A from lower edge of pedal to firewall: 225 + 10 mm
Refer to illustrations above for checkpoints.
- Brake light switch adjusting distance B: - mm
Refer to illustrations above for checkpoints.
- Max. pull rod - reversing lever / stop distance max: - mm
Refer to illustrations above for checkpoints.
- Distance B from lower edge of pedal to fire wall: 260 + 10 mm
Refer to illustrations above for checkpoints.
- Full load stop screwed adjusting distance C
Refer to illustrations above for checkpoints.
Manual Transmission: 62 mm
Automatic Transmission: 54 mm
EH transmission: 51 mm

NOTE:
- Lubricant for bearings: Renocal FN 745 or equivalent.
- Specified distances are reference values only and do not account for installation tolerances.
- Distances without consideration for carpets.