Federal Odometer Disclosure Requirement 92-513

Federal Odometer Disclosure Requirement 92-513

The Federal Odometer Disclosure Requirement 92-513 states that, whenever an instrument cluster component is replaced that brings the odometer back to 0 (coding plug), the mileage prior to its replacement along with the date that the replacement occurred must be recorded on the left door frame of the vehicle.







A permanent label to record this information is included with every coding plug (except E36/5 and E36/7) that is ordered from the parts department.
Additional labels can be ordered separately under Part Number 89 89 1 000 500. Refer to SI Bulletin 62 03 88 (1598).

It is the responsibility of the person making this replacement to record this information on the vehicle and in the Owner's Service Warranty Information Booklet.







Strict compliance with this requirement must be followed through with the following vehicles if mileage is reset to 0:
- E32/E34 All instrument Clusters
- E36 - 318i, is, 325i, is and M3. Reference SI Bulletin 62 02 95 (4174) regarding alternative E36 odometer reading transfer.