Traction Control Module: Service and Repair

NOTE: Remove bottom paneling and glove compartment.

CAUTION:
- Control unit must only be removed and installed after switching ignition off.
- In vehicles with ASC+T, the new control unit must be activated in throttle-valve idle position, refer to Powertrain Management.





- Unlock control-unit connector.
- Fold out clamp (1), pull off connector (2) on right-hand side and disconnect on left-hand side.





- Unscrew mounting bolts and remove control unit together with holder.





- Unscrew bolts and take control unit off holder.





- Installation note:
First connect connector on left-hand side, then press in on right-hand side and fold in clamp.