Siemens S10 With Basic Telephone Interface (GSM Network)

Siemens S10 With Basic Telephone Interface (GSM Network)

Siemens S10 with Basic Interface Telephone (GSM network only)
The BIT basic Interface Telephone is equipped with diagnostic capabilities and a fault code memory.

Functions
The Siemens S10 is connected to the I/K-bus via the Basic Interface Telephone. This enables operation via the on-board monitor, MID and multifunction steering wheel. Hands-free operation is conducted via a microphone and double coil speaker. The output of other sources is interrupted by the mute circuit. Remote data or fax transmission is also possible with a separate connection.

Receiving and passing on special SMS messages:
- Text display of SMS messages in on-board monitor and MID
- Call back to SMS sender
- Storing telephone list on SIM card
- Transferring navigation destinations to vehicle
- Programming independent park heating and ventilation timer
- Transferring vehicle position to control center (with navigation system only)

Components
- Mobile phone with integrated transceiver, rechargeable battery and card reader
- Eject box with electronic charging facility in center armrest
- Basic Interface Telephone with hands-free facility in luggage compartment with link to I/K-bus
- Line compensator(antenna amplifier) for amplifying transmit/receive signal from mobile phone
- Hands-free microphone in headliner for hands-free telephone function
- Double coil speaker for sound output during hands-free telephone operation in driver's/front passenger's footwell
- Antenna