Replacing All Handbrake Shoes

Note: Remove rear brake disk.

Installation: After completing work, adjust parking brake.





Disconnect return spring (1) with brake spring pliers.
Installation:
Check return spring (1), replace if necessary.
Figure illustrates right side: left side is mirror image of this.
Pay attention to installation position of adjustment screw (2).

Apply a thin coat of grease to bush and screw threads, BMW Operating Fluids.





Disconnect return spring (1) with brake spring pliers.
Installation: Check return spring (1), replace if necessary.





Turn clamping pins (1) with special tool 34 4 000 through 90° and disconnect.
Remove brake shoes (2).