Tightening

Cylinder Head Bolts M10:





Tightening Sequence

Jointing Torque 40 Nm
1st Torque Angle 90 °
2nd Torque Angle 90 °

NOTE: Relace wash and oil screws.

Cylinder Head Cover:
M6 10 Nm
M7 15 Nm
Timing Case To Cylinder Head:
M7 15 Nm
M8 20 Nm
Oil Line To Bearing Points And Camshaft Lubrication:
M6 10 Nm
Oil Lines For Camshaft Lubrication On Cylinder Head:
Banjo Bolt M8 x 1 10 Nm
M5 5 Nm
Oil Cooler Oil Pipes To Oil Filter Housing:
M8 22 Nm
Intake Manifold On Cylinder Head:
M6 10 Nm
M7 15 Nm
M8 22 Nm
Exhaust Manifold
M6 10 Nm
M7 15 Nm
M8 23 Nm