Steering Column: Specifications

Coupling to steering gear/steering spindle (Replace clamping screw) 22 Nm
Mounting block for steering wheel adjustment to carrier of instrument panel and pedal mounting block All (M8) 22 Nm
Hex screw on bearing block for adjustment of steering wheel E46:
1. Tighten nut hand-tight(adjusting lever in clamped position)
2. Open and close lever
3. Tighten nut 4.0 Nm
4. Open and close lever
5. Tighten nut 4.8 Nm
6. Open and close lever
7. Tighten nut 4.8 Nm
Clamp/shackle for outer steering (All except E23) 22 Nm
Airbag: Steering column to holder(All) 18 Nm
Steering column to dashboard (All) 22 Nm
Steering column to dashboard (All) 14 Nm
Sliding piece (screw/nut) (E46) 9.5 Nm
Control unit, steering column (CIM) to steering column (E65) 2.5 Nm