Checking Transmission Fluid

Checking Transmission Fluid Level:

The Drain and Fill plugs are located as shown:







Checking the transmission fluid level requires the fluid temperature be between 30 °C and 50 °C.

- Connect the DIS or MoDiC to the 20 pin diagnostic connector of the vehicle.
- From the diagnosis start screen identify the vehicle and press the continue arrow.
- From the vehicle identification screen press the continue arrow.
- From the Fault Symptom Selection Menu press the "Function Selection" button on the bottom left of the screen.
- From the "Operations" column, select "Service Functions", then "Drive", then "Electronic transmission control"
- Then select "Oil Level Check" from the Components list on the right side of the screen and press the "Test Schedule" button.
- From the Test Schedule listing, select "Oil Level Check" and press the continue button.
- Select 1. Oil Level Check by pressing the #1 button. Follow the instructions on screen to carry out the oil level check procedure.