Headlamp Alignment Actuator: Service and Repair

Removing And Installing/Replacing Left Headlight Vertical Aim Adjuster (Xenon Headlight)

Detach expansion tank, supply reservoir for power steering pump and main flow oil filter housing (disconnect plug connection on level switch) from equipment carrier.







Release screws (1) and remove equipment carrier (2).







NOTE: For purposes of clarity, illustration shows component removed.


Release screws (1) and remove protective cap (2).

Installation Note: If necessary, replace seal on protective cap.







Disconnect plug connection (1).
Loosen screws (2).
Feed out headlight vertical aim adjuster (3) and remove.







Installation Note:
Pull out bulb holder of high-beam headlight.
Feed ball head (1) of headlight vertical aim adjuster into guide (2).
Adjust headlights.