Replacing Rear Left Or Right Ride Level Sensor

Replacing Rear Left Or Right Ride Level Sensor

Caution:
After assembly, perform height setting offset.
If necessary, check headlight adjustment.





If necessary, remove height setting sensor and bracket. Remove connector (1).
Unfasten nut (2) and disconnect control rod.
Release screw (3) and remove ride level sensor.

Installation:
Lever (4) points outwards.
Pay attention to centering pin (5).
Tightening torque:
- Ride level sensor to holder 5 Nm
- Control rod to ride level sensor/holder 8 NM
- Control Rod to swinging arm (Rear) 8 NM
- Bracket ride level sensor to rear axle carrier 8 NM