Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2004 >> M3 Convertible (E46) L6-3.2L (S54) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Replacing Front ABS Pulse Generator
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Replacing Front ABS Pulse Generator

Replacing Front ABS Pulse Generator





Open plug housing (1), pull plug connection (2) out of fixture and disconnect.
Pull cable with rubber grommet out of fixtures on spring strut and on body.
Installation: Ensure proper locking of plug connector and proper seating of rubber grommets.





Release hexagon socket screw (1). Withdraw ABS pulse generator (2) from bore hole.
Installation:
Clean bore hole for pulse generator and grease with lubricating grease Staburags NBU 12/K.
Pulse generator to swivel bearing / wheel carrier 8 Nm








Open plug housing (1), pull plug connection (2) out of fixture and disconnect.
Pull cable with rubber grommet out of fixture on spring strut and on body.
Installation: Ensure proper locking of plug connector and proper seating of rubber grommets.





Release hexagon socket screw (1).
Withdraw ABS pulse generator (2) from bore hole.
Installation:
Pulse generator to swivel bearing / wheel carrier 8 Nm





Installation: Clean hole for pulse generator and grease with lubricating grease.
pro multis · About Operation CHARM