Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2004 >> X5 (E53) V8-4.4L (N62) >> Repair and Diagnosis >> Maintenance >> Timing Component Alignment Marks >> Locations
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Timing Component Alignment Marks: Locations



The procedure for "Checking Camshaft Timing" can be found under Camshaft, Engine Testing and Inspection

The following is taken from "Removing and Installing / Replacing Inlet and Exhaust Adjustment Units on Right Side"
Removing and Installing / Replacing Inlet and Exhaust Adjustment Units on Right Side
Removing and Installing / Replacing Inlet and Exhaust Adjustment Units on Left Side






Place special tool 11 9 461 on inlet camshaft and align inlet camshaft so that special tool 11 9 461 rests without a gap on cylinder head.
Fit special tool 11 9 463, secure screw ( 1 ) in thread for oil line and tighten down by hand.
pro multis · About Operation CHARM