Ignition Switch Lock Cylinder: Service and Repair

32 32 050 Removing and installing or replacing steering lock cylinder

Special tools required:
^ 32 3 1 10

Necessary preliminary tasks:
^ Remove steering column shroud.
^ Remove ring antenna.





With ignition lock key, turn lock barrel to required position "R" = radio, windscreen wipers, etc.
Press special tool 32 3 110 into locking cylinder hole and remove locking cylinder.





Note: The lock (1) is unlocked with special tool 32 3 110 and the locking cylinder can now be removed. If necessary, turn special tool in hole.