Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2005 >> 325Ci Convertible (E46) L6-2.5L (M54) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Level Sensor For ECM >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Level Sensor For ECM: Service and Repair



Replacing Level Switch For Engine Oil (M62, M54, S54, M56)

Necessary preliminary tasks:
- Switch off ignition.
- Unfasten cover on full-flow oil filter to enable engine oil in filter to flow back into the oil sump.
- Drain engine oil.

Remove reinforcement plate.

IMPORTANT: Do not drive the vehicle under any circumstances with the reinforcement plate removed, including on or off the service rack.







Disconnect plug connection (1).
Unscrew nuts (2).
Remove level switch (3).

Installation:
Clean sealing surface on oil sump and replace seal of level switch.

Installation:
Screw on oil-filter cover tightly.
All Screwed on covers 25 Nm

Top up engine oil.
pro multis · About Operation CHARM