Removing and Installing/Replacing Rear Rubber Seal

54 31 110 Removing And Installing/Replacing Rear Rubber Seal







Release screws (in area 1) on left and right.
Remove seal.







Cut out cloth (1) from rubber seal (2) of rear window run (scalpel).

Installation:
Stick cloth (1) into rubber seal (2) with superfast adhesive.







Drill out rivets in window guide on C-pillar.
Remove window guide and remnants of rivets.
Feed seal out of rail of window run.

Installation:
Because of larger rail depth, attach a nut as adapter between rivet and riveting pliers for riveting purposes.

CAUTION: Risk of damage to door window or window guide: Make sure there are no parts protruding from rivet. Riveting bolt must be correctly torn off.