Removing and Installing/Replacing Lock for Left or Right Rear Seat Backrest

52 24 311 - Removing and installing/replacing lock for left or right rear seat backrest





Note:
Perform emergency actuation Emergency Actuator for Rear Seat Backrest for rear seat backrest (1).

Unfasten screws (2).
Tightening torque 52 24 02AZ 52 24 Rear Seat (Normal), Manual.





Remove Removing and Installing/Replacing Backrest backrest and set down forwards.
Remove lock (1) completely from installation opening.





Display bridge (1) can be pressed out of lock during emergency actuation.
Remove display bridge (1) from lock.
Display bridge (1) does not have to be reinstalled.






Installation:
Slide guide lug (1) of lock into opening (2).





Adjusting lock:
- Slacken screws

- Firmly push engaged backrest back

- Tighten down screws

Important!
Check backrest lock without fail.