Procedures

Replacing Instrument Panel Trim

Remove left fresh air nozzle.
Remove panel for instrument panel.







Unfasten screws (1) and remove bracket (2).

Convertible only:
Stick sketch below to new instrument panel; this is included with the replacement instrument panel.
Cut out instrument panel at bottom in accordance with sketch.







Detach retainers (1) and remove cover (2) for steering column paneling.







If necessary, release screw (1) and detach air duct (2) on left/right.







Lift fresh air grill (1) above catches (2) and press out.







Remove metal nuts (1) from tunnel (2) of instrument panel.







Passenger side:
Remove retainers (1) and (2).
Remove plastic nuts (3) and metal nuts (4).







Driver's side:
Remove clips (1).







Drivers side:
Remove metal nuts (1) and plastic nuts (2)







Driver's side:
Remove metal nuts (1) and plastic nuts (2).