35 31 000 Removing and Installing or Replacing Clutch Pedal

35 31 000 Removing and installing or replacing clutch pedal







Necessary preliminary tasks:
- Remove pedal trim.
- If necessary, remove over-centre helper spring







Disconnect return spring (1).
Press end of pin (2) together with offset pliers and press out pin.
Detach locking clip (3) and pull clutch pedal off bearing block.

Installation:
Replace locking clip (3).
Locking clip (3) must be seated with both legs in the pin groove.







Installation:
Check bearing bushings (1) and replace if necessary.
Lightly grease bearing bushings (1).