Differential Assembly: Service Precautions

00 .. ... Raising Vehicle With Trolley Jack







Observe the following trolley-jack-related instructions:
1. Only trolley jacks sold or approved by BMW, with a rubber plate on their mounting, may be used.
2. Trolley jacks must be regularly serviced and always checked for functional reliability before they are used.
3. Check the rubber plate on the trolley jack prior to each use, replacing if necessary.







IMPORTANT:
All-wheel drive vehicles may only be raised with the reinforcement plate fitted on the front axle.
Raising directly on the front axle support without reinforcement plate is not permissible.

WARNING: The vehicle may be raised with a trolley jack only at the following mounting point.







1. Jacking point on reinforcement strut (rear-wheel drive)
2. Side car jacking points
3. Rear axle final drive

NOTE: It is not permitted to raise the vehicle at the rear differential cover.







1. Jacking point on front axle support (four-wheel drive)







Risk of damage:
Jacking point (1) must be present.
Align the rubber plate on the trolley jack to the jacking point (1) in such a way that there is no contact to adjacent components and that they are therefore not damaged.