(DME) Condition For Fault ID - 2

2A94 - P0335

Information saved in
DME

Fault code
2A94 - P0335

Fault text
Crankshaft sensor, signal

Fault description
Crankshaft Position Sensor 'A' Circuit

Condition for fault identification
Test condition:
Crankshaft signal monitor
Signal detected and synchronization with crankshaft
confirmed.
Terminal condition: Terminal 15, engine on

Condition for fault memory entry
Fault code is stored when 12 NW flanks but no KW teeth
have been registered although teeth were detected earlier

Action in service
1. Check signal wire for short to positive, ground, opens and
interference signals
2. Replace crankshaft sensor

Fault effect and breakdown warning


Driver information
none

Service instruction
none