2AA1

2AA1 - P0365

Information saved in
DME

Fault code
2AA1 - P0365

Fault text
Camshaft sensor, exhaust, signal

Fault description
Camshaft Position Sensor 'B' Circuit (Bank 1)

Condition for fault identification
Test condition:
NW signal position detection monitor.
Terminal condition: Terminal 15, engine on

Condition for fault memory entry
On every engine cycle when no camshaft flank has been
detected.

Action in service
1. Check signal wire for short to positive, ground, opens and
interference pulses
2. Replace camshaft exhaust side sensor,

Fault effect and breakdown warning


Driver information
none

Service instruction
none