Data Link Connector: Service and Repair

61 13 ... - Removing and installing/replacing OBD-II socket





Special tools required:
- 61 0 315 61 0 300 Releasing Tool (Complete Kit)





Necessary preliminary tasks:
- Remove trim for pedal assembly 51 45 185 Removing and Installing/Replacing Panel For Pedals





Note:
OBD-II socket cover (2) is not fitted on the E63 / E64.

Unlock slide plate (3) with a suitable tool in direction of arrow.
Insert special tool 61 0 315 61 0 300 Releasing Tool (Complete Kit) in OBD-II socket (1) in direction of arrow and press out associated flat spring contact (4). Press remaining flat spring contacts with special tool 61 0 315 61 0 300 Releasing Tool (Complete Kit) out of OBD-II socket (1).

Installation:
Pay attention to pin assignment of OBD-II socket (1).
Make sure flat spring contacts and slide plate (3) are correctly engaged and seated in OBD-II socket (1).